The G-STRETCH 215 is an efficient and user-friendly pneumatic stretching machine. The mesh is automatically stretched by means of pneumatic stretching clamps.

The simple and easy-to-use standard control module contains three separate circuits regulating the X, Y and Z axes. This allows for individual adjustment of the stretching power and speed. Additionally, the stretching power needs only to be adjusted for the first screen of a series. The clamps themselves are actuated by means of two manual switches, one controlling the X/Y axes (mesh tension), and the second for the Z axis (frame contact pressure).

The programmable touchscreen control unit in the G-STRETCH 215A variant (See Version A2 product option below) adds precision automation in the form of 50 configurable stretching programs, each with up to 10 predefined stretching cycles.

The G-STRETCH 215 can be adjusted in seconds to a range of screen sizes, from large to very small.

Features

• Maximum frame format 118″ x 118″ in (3000 x 3000 mm)
• Instant adjustment of the machine size
• Automatic pre-bowing of the screen frames
• No contact between frame and mesh during stretching process
• Pneumatic stretching with highest precision
• A support board allows stretching of multiple frames simultaneously

Product Options

Version A1

Pneumatic stretching device for manual operation

Version A2 (G-STRETCH 215A)

Fully automatic and programmable touchscreen control system

Option W

This option consists of a wooden board with either 4,6 or 9 adjusting plates (to be selected) for CD screen frames. This allows a precise setting of the desired stretching angle in increments of 0, 7.5, 15 and 22.5 degrees.

Option Z

Additional screen frame support can be attached to two or four sides for increased contact pressure when a support plate is inserted into the machine in order to stretch several small screen frames at the same time.

Product Images